Protein Buildup on Contacts

You rely on your contact lenses to offer crystal clear vision that you can use daily. However, contacts require cautious upkeep to avoid protein accumulation. Proteins are naturally discovered in your tears and can bind to your contacts. You might discover the protein deposits on your contacts as a thin haze on the lenses. While you might use a contact lens option to store your contacts, you should utilize a customized protein elimination option to remove protein deposits. Knowing this technique is advantageous for both soft and tough contact lens wearers.

Causes of Protein Buildup on Contacts

A separate protein solution is available for use monthly or upon indication.

Some causes of dirty contact lens and methods to keep them clean are:

Too long using time
This can consist of keeping contact lenses more prolonged than the suggested time, for example utilizing monthly wear lenses that additional week before you get rid of them. You may also have to lower your wearing time each day by inserting them later on or eliminating them earlier every day. If you are heading out and plan a late night, it is an excellent concept to remove and clean your contact lenses while you prepare yourself, then reinsert them before you leave.

Overnight or prolonged wear
Wearing contact lenses overnight can result in the lenses tending to dry, causing deposits on the lens surface area with subsequent ocular inflammation. If your lenses are continually unclean, then it might be time to stop wearing them on an extended wear basis and instead remove them each night.

Month-to-month replacement contact lenses
If your lenses are replaced monthly, then no matter how thoroughly you clean them by the end the month they will not be as fresh as when they were first opened. If you find that no matter how well you take care of your lenses they still end up being dirty towards the end of their wearing time, then you must have your eyes refitted with daily replacement lenses.

Some medications can cause ocular dryness leading to increased deposits on the contact lens.
Some medications can cause ocular dryness leading to increased deposits on the contact lens.

Environment
Environments such as in air-conditioning and windy, dirty conditions will trigger your eyes and contact lenses to dry irritating the ocular surface area. This will trigger your eyes to secrete more mucus making the contact lenses unclean. If you remain in air-conditioning or a dusty environment, it would be prudent to place lubricating eyedrops regularly. If you are outside and it is windy, you ought to use wrap-around style sunglasses to protect your eyes from the wind.

Improperly fitted lenses
If contact lenses are not fitted correctly, they can move too much, triggering ocular irritation. This will lead to increased secretion of mucus and protein from the tears glands causing contact lenses deposits. You need to guarantee that your contact lenses are fitted correctly.

Contact lens material
Some contact lens products are more vulnerable to deposits. Silicone hydrogel materials have the advantage of greater oxygen permeability but the downside that the earlier generation materials in some cases do not wet along with a hydrogel type contact lens. If a new generation material such as Dailies Total One still leads to contact lens discomfort due to deposits, then it might be worthwhile to attempt a hydrogel contact lens material. If a soft contact lens is not able to be worn when you need to think about refitting with a deposit resistant Hard Gas Permeable contact lens.

How to Remove Proteins From Contact Lenses

 contact lens with protein build up
For soft contact lenses there are available protein tablets and protein solutions which contain an enzymatic cleaner to dissolve protein off the contact lens surface.
  1. Wash your hands thoroughly with antibacterial soap. This helps to prevent any dust or germs from transferring from your hands to your contact lenses. Dry your hands completely.
  2. Close the contact lens case or protein basket firmly to avoid liquid from dripping out. Shake the lens case for half a minute to guarantee the service completely coats the contact lenses.
  3. Enable the lenses to soak as recommended — usually 2 hours’ time.
  4. Get rid of the contact lenses from the protein cleansing case and rinse with a multi-purpose or saline lens service, according to All About Vision. Inspect the contacts for bubbling after you have used this option and continue to apply up until you note no bubbling — this symbolizes that there are no longer protein deposits on the contacts. Continue by either putting in your contacts or saving them in your standard option.

Things You’ll Need
– Protein removal solution
– Clean contact lens case
– Anti-bacterial soap

Tips
Utilizing a multi-purpose contact option can assist to eliminate protein buildup on a daily basis, according to Web Health Centre. If you experience regular eye infections or have concerns about protein accumulation, be sure to clean up the contacts weekly with a protein removal solution.

Warnings
Failure to eliminate protein deposits on your contacts can cause severe eye infections and other eye problems.

If you buy something through a link on this page, we may earn a small commission.

Comments: 1
  1. Zachary

    Protein buildup on contacts is the biggest cause of frequent replacement and poor vision or distortion of the clouding of your vision. With such a problem it is impossible to fight you can only carry out prevention.

    Clean wash the lenses with a solution before you need to thoroughly wash your hands. Keep the lenses in a special case too if someone did not know and keeps them on the windowsill.

    More advice, watch carefully for your lenses and change them more often if there is such an opportunity because it is our eyes.

Comments are closed.